MEMORIAL DAY SALE: Up to 30% OFF Supplies | Up to $1000 OFF Equipment
Sale Ends Soon Details

iColor Hot Stamping Foil - Colbalt 12.5 in x 20 ft (318mm x 6.1m) Roll - includes 1 roll



iColor Hot Stamping Foil - Colbalt 12.5 in x 20 ft (318mm x 6.1m) Roll. iColor Hot Stamping Foil - Colbalt 12.5 in x 20 ft (318mm x 6.1m) Roll

The iColor Hot Stamping Foil allows you to augment your already transferred design by pressing a variety of foil colors on top of your graphic. The foil adheres to any transferred design and adheres best to composite black toner based prints. Also recommended to use with like colored designs. For example, apply orange foil on an orange colored design to mask any imperfections.

iColor Hot Stamping Foil presses at (310°F / 154°C), which is the same temperature as the iColor Standard 2-Step Paper, so there is no waiting for your heat press to change temperature between presses. Some care must be taken when pressing onto some types of synthetic material such as nylon or polyester. Spandex or lycra material is not recommended.

iColor Hot Stamping Foil is available in a very large variety of colors and designs to suit any situation. Augment your graphic transfers with iColor Hot Stamping Foil.

WARNING: WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user. Specialty inks and film require a good humidity and temperature environment (50% - 70% humidity, and 75° to 80°F) to minimize risk of ink clogs and film buckling.