This DTF PRO HEAT MAT is designed as an in-line addition to your DTF system. This equipment performs POWDER HEATING (which cures the powder to the film), so you don't have to do so in an oven or other heating device.

Heating temperature: 0-150 degrees Celcius (up to 300 degrees Fahrenheit) - 108 degrees Celcius is the recommended temperature for powder curing (allow to sit for 2 mins 30 seconds). Heating area: 430*300*30mm

DTF PRO focuses on function and results. DTF offers advantages over comparative systems (including Toner Transfer, or even DTG), and is arguably the most popular textile printing technology on the market for systems under $10,000. DTF works for multiple fabric types (cotton, poly, blends and more), and works on both White and Dark Textiles. It is recommended that you operate your DTF equipment and processes in a well ventilated room with a filtration system and/or wear protective masks. This is a DIY type item which requires practice and patience to hone your skills. Just like any product or business venture, you can't expect it to make you money out the box - you need to work at it and hone your skills. DTF is not a complicated technology, but it does have a learning curve. There are many resources online (videos, forums, groups) that can provide you with guidance, tips and advice - and we will recommend and provide some of these resources to our customers.

Color of equipment is subject to availability, image is a representation, actual design may vary.

WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment when working with specialty printing and curing products and processes (including DTF, DTG, UV) as fumes may be hazardous. Specialty inks and film require a good humidity and temperature environment (50% - 70% humidity, and 75° to 80°F) to minimize risk of ink clogs and film buckling)