DTFPRO Printhead Cleaning Solution (for cleaning or flushing of printheads)

Get up to 20% OFF with coupon SPRING25 for a limited time
(20% OFF orders over $150, 10% OFF smaller orders)

Size		Price
100 ml		$7.99
950 ml		$19.99

This cleaning solution by DTGPRO is for cleaning of DTG or DTF printheads.

To be used for flushing of the print head, either manually with the syringe and tubing (flushing the printheads), or for printers that are cartridge based, you can fill this cleaning solution into cartridges and using those cartridges as "cleaning cartridges" and running up to 3 cleaning cycles with them. For printers that are not cartridge based (such as continuous ink system based printers), you would use the cleaning solution in the manual method (flush the heads with it). This solution is for use in resolving minor clogs. Flush your print-heads with this solution (if your system is damper/CIS based), or fill it into "cleaning cartridges" and run up to 3 cleaning cycles with those cartridges (if your system is cartridge based). Do not use for wet capping.

Available Options:

Size	Price	Unit Price
100 ml	$7.99	$0.08 per ml
950 ml	$19.99	$0.02 per ml

WARNING: WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user. Specialty inks and film require a good humidity and temperature environment (55% - 75% humidity, and 75° to 80°F) to minimize risk of ink clogs and film buckling.

solutions-all.pdf