SEMI ANNUAL SALE: Valid June 17-24 Get the coupons.
Up to 25% OFF supplies | Up to $1000 OFF printers

Ecofreen Mister T-2 Direct to Garment Automated Pretreatment Machine

Price:

$4,394.99

0% interest for 6 months

The Mister-T2 pretreatment machine is designed to pretreat garments automatically before printing. With smooth and precise injection of this machine, you can get fine quality of printing and consistent out come. It is light weight and has compact size. You are able to carry and place in the limited space. Also, you are able to clean and operate easily without any specific skills. Save your time and cost with this machine!

Main Features:

  • 2 Nozzles
  • Adjustable Nozzle Angle for complete spraying coverage
  • Consistent spraying
  • Adjustable Spraying Area
  • Preset: Frequent options can be saved and retrieved
  • Real-Time Cost Calculation of Liquid for each spraying (Cents)
  • Pre-Scanning: Preview the spraying are with a laser.
  • Capping Station Protects the nozzles from drying or clogging
  • Smart Auto Nozzle Cleaning and Flushing Program: With the machine on, it will automatically purge water every 4 hours to prevent the nozzles from clogging.
  • Rust Free Structures and Parts: All Structures and parts are made of Aluminum and Stainless Steel
  • Open Top Design for easy maintenance
  • LED Light
  • Ventilation Fan: The fan is designed to prevent the pretreat mist from getting stuck and clogged in parts of the machine
  • Easy Drainage: The front legs are slightly higher than the back legs and also has a slanted basement.
  • Enough Space for thick garments like hoodies.
  • Easy to Switch from pretreat to water by multi-Inlet selector valves
  • 12 Months Warranty (1 Year)

Mister T2 Features:

  • Easy Control Panel
  • Nozzle Capping Station
  • Multi-Inlet Selector Valves on the Side
  • Adjustable Nozzle Angle
  • Freely Select the Spraying Area
  • Top Cover Open
  • Slant Basement
  • 16"x 20" (40cm x 50cm) Size Platen

Mister T2 Specifications:

  • Dimensions: 560mm(W) x 800mm(L) x 590mm(H)
  • Weight: 88 lbs (40kg)
  • Platen Size: 16"x 20" (40cm x 50cm)
  • Number of Spray Nozzle: Two Nozzles
  • Maximum Spray Area: 16"x 20" (40cm x 50cm)
  • Spray Cycle Time: 3 sec-9 sec, by 1to5 speed
  • Power Supply: Free Voltage (100V-240V 50/60hz)
  • Power Consumption: 60W
  • Packing Size: 670mm(W) x 935mm(L) x 840mm(H)
  • Packing Weight: 110lbs (50kg)
  • Liquid Consumption: With Minimum Speed: about 85ml; With Maximum Speed: about 12ml

The Mister T2 is manufactured in Korea.

SPECIAL ORDER: The Ecofreen Mister-T2 is special ordered, so we cannot accept returns for this machine. We do offer the 6 month warranty for replacement parts as listed in the warranty agreement.



WARNING: WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user. Specialty inks and film require a good humidity and temperature environment (50% - 70% humidity, and 75° to 80°F) to minimize risk of ink clogs and film buckling.