iColor Glitter 2 Step -B- Adhesive Media for Light and Dark Textiles -Tabloid- 11 in x 17 in (279 x 432mm) Requires- A-Transfer Paper - includes 100 pcs

Price:

$365.00

iColor Glitter 2 Step -B- Adhesive Media for Light & Dark Textiles -Tabloid- 11 in x 17 in (279 x 432mm) Requires- A-Transfer Paper. iColor Glitter 2 Step -B- Adhesive Media for Light & Dark Textiles -Tabloid- 11 in x 17 in (279 x 432mm) Requires- A-Transfer Paper.

The iColor 2-Step Glitter Adhesive Media will allow you to transfer prints from the iColor series of printers onto a variety of light and dark garments and fabrics, with a glitter effect. Use iColor 2-Step Standard or Select Transfer Media with this product to add a glitter effect to your everyday transfers. Unlike foil stamping, the glitter is part of the white adhesive that is applied as a result of the 2-step process. It enhances the color of your print, and increases the adhesion to your garment for maximum durability, opacity and vibrancy on your finished product, as well as adds glitter to the entire image. Rasterization and breathability integrated into your design, as well as using the garment color as a mask, will enhance the stretch limit and softness of your finished product.

Only for use with iColor Printers using iColor Clear toner cartridges. Does not work with white toner systems!

MUST BE USED WITH EITHER THE SELECT OR STANDARD 2 STEP TRANSFER 'A' MEDIA!

THE USE OF A GLOSSY FINISHING SHEETS IS HIGHLY SUGGESTED TO GIVE THE TRANSFER A SHINY LOOK.

Sold in packs of 100

IMPORTANT: Requires the use of clear toner.

WARNING: WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user. Specialty inks and film require a good humidity and temperature environment (50% - 70% humidity, and 75° to 80°F) to minimize risk of ink clogs and film buckling.