DTFLINE / BUILT FOR YOUR WORKFLOW
DBLDBL V2 · PNEUMATIC DUAL-STATION HEAT PRESS
LOAD.
PRESS.
KEEP MOVING.
Two workstations. Pneumatic pressing. One streamlined routine. Put the essentials of dual-station production to work.
02WORKING STATIONS
40 × 50CM HEAT PLATEN
AIR POWERPNEUMATIC PRESSING
Keep your heat transfer workflow moving with the DTFLINE DBLDBL V2. Prepare a garment on one station while the other is pressing, then alternate stations to keep loading and pressing organized. With a sliding upper heat platen, adjustable pneumatic pressure, and an automatic press-and-release cycle, V2 brings the essentials together in a straightforward production platform.
01Load the next.
Position your next garment and transfer on the available station.
02Let it press.
Use pneumatic pressure and your selected temperature and time settings to run the pressing cycle.
03Keep it moving.
Alternate between stations, preparing one while the other presses.
The essentials. Ready to work.
The core dual-station workflow, with straightforward controls. V2 is a practical fit when your priority is alternating between two working stations with pneumatic pressing and digital temperature and time settings.
- Sliding upper heat platen: move the heated platen between the two working stations.
- Automatic press-and-release cycle: the press releases when the timed cycle is complete.
- Adjustable pressure: pneumatic pressure control and a platen adjustment system let you configure pressing pressure.
- Digital controls: set temperature and dwell time for your transfer process.
- Integrated industrial heat plate: designed for heat transfer applications.
- Emergency stop: provides a dedicated stop function.
Same dual-station idea. Different control levels.
| Feature | DBLDBL V2 | DBLDBL V3 |
|---|
| Core platform | Dual-station pneumatic press | Dual-station pneumatic press |
|---|
| Platen size | 40 × 50 cm | 40 × 50 cm |
|---|
| Temperature & timer | Digital temperature and timer controls | Digital controls with temperature calibration and self-tuning |
|---|
| Pressing pressure | Adjustable pneumatic pressure and platen adjustment | Adjustable pneumatic pressure, plus balancing on the heat plate and bottom platen |
|---|
| Press & lift speed | Not specified in supplied V2 specifications | Adjustable via solenoid valve restriction adjustment |
|---|
| Operating controls | Automatic press-and-release cycle | Manual and semi-automatic modes; two-hand activation in manual mode |
|---|
| Temperature display | Unit selection not specified | Selectable Celsius or Fahrenheit |
|---|
| Best fit | Straightforward dual-station production | Production requiring additional setup and operator controls |
|---|
Comparison reflects the supplied model specifications. Features not specified for V2 should be confirmed for the exact machine configuration.
Want to dial in more?
Step up to V3 for temperature calibration, pressure balancing on both platens, and adjustable press and lift speed.
Meet the DBLDBL V3 →Technical specifications
| Specification | Details |
|---|
| Model | DTFLINE DBLDBL V2 |
|---|
| Configuration | Pneumatic dual-station; sliding upper heat platen |
|---|
| Heat platen | 40 × 50 cm (approximately 15.75 × 19.69 in; nominal 16 × 20 in class) |
|---|
| Voltage | 110V or 220V, depending on configuration |
|---|
| Power options | 2.2 / 2.5 / 3.0 / 6.0 kW, depending on platen size and configuration |
|---|
| Temperature range | 0–399°C (32–750°F), as specified for V2 |
|---|
| Timer range | 0–999 seconds |
|---|
| Machine weight | Approximately 75 kg (165 lb), based on the 40 × 50 cm model |
|---|
Electrical specifications vary by configuration. Confirm the voltage, wattage, and temperature rating for the machine being ordered before arranging installation.
Air supply & installation
| Specification | Details |
|---|
| Air compressor | Required; sold separately |
|---|
| Operating air pressure | 4–6 bar / 0.4–0.6 MPa (approximately 58–87 PSI) |
|---|
| Maximum air pressure | 8 bar / 0.8 MPa (approximately 116 PSI) |
|---|
Plan your setup before production.An external air compressor is required for operation and is not included. Professional setup and testing are recommended. Machine color or external appearance may vary by production batch.
Warranty, product use & safety
Warranty & Product Use
Manufacturer warranty covers defects in materials and workmanship under normal intended use. Warranty does not cover physical damage, misuse, improper installation, neglect, accidents, improper transport, or unauthorized modifications or repairs. Removal or alteration of the product serial number may void warranty coverage.
Proper installation, operation, and maintenance in accordance with all provided instructions is the responsibility of the operator. DTGPRO is not liable for incidental, consequential, or indirect damages, including loss of use, production downtime, or lost profits resulting from product use or misuse.
Safety Guidelines
- Use only with properly grounded electrical outlets.
- Operate in dry environments only.
- Keep hands clear of moving components and heated surfaces.
- Disconnect power when not in use or during maintenance.
- Keep out of reach of children.
- Read all operating instructions before use.
Free Shipping on Qualifying Orders see details |
