DTFLINE / BUILT FOR YOUR WORKFLOW
DBLDBL V3 · PNEUMATIC DUAL-STATION HEAT PRESS
DIAL IT IN.
PRESS WITH
MORE CONTROL.
Your temperature. Your pressure. Your pace. Refine the pressing process with expanded controls and pressure-balancing features.
CALIBRATETEMPERATURE CONTROL
BALANCEPLATEN PRESSURE
ADJUSTPRESS & LIFT SPEED
Fine-tune your heat transfer workflow with the DTFLINE DBLDBL V3. It combines the same practical dual-station pneumatic concept with expanded temperature controls, pressure balancing on the heat plate and bottom platen, and adjustable press and lift speed. Choose V3 when you want more ways to configure and control the pressing process.
01Load the next.
Position your next garment and transfer on the available station.
02Let it press.
Use pneumatic pressure and your selected temperature and time settings to run the pressing cycle.
03Keep it moving.
Alternate between stations, preparing one while the other presses.
Small adjustments. More control.
Expanded setup options for a more adjustable pressing process. V3 adds controller functions and mechanical adjustments that help operators refine temperature settings, pressure distribution, and platen movement.
01 / TEMPERATUREFine-tune your heat.Temperature calibration and self-tuning let you refine controller settings for your pressing process.
02 / PRESSUREBring balance to the press.Balancing on the heat plate and bottom platen supports more consistent pressure distribution.
03 / MOVEMENTSet the pace.Adjust press and lift speed through the solenoid valve restriction setting.
04 / OPERATIONChoose how you work.Manual and semi-automatic modes, with two-hand activation in manual mode.
Plus: selectable °C/°F display and an optional session-based transfer counter, where equipped.
- Digital temperature and timer control with adjustable pneumatic pressure.
- Emergency stop button and industrial-grade pressing framework.
- CE certified and RoHS compliant.
Same dual-station idea. Different control levels.
| Feature | DBLDBL V2 | DBLDBL V3 |
|---|
| Core platform | Dual-station pneumatic press | Dual-station pneumatic press |
|---|
| Platen size | 40 × 50 cm | 40 × 50 cm |
|---|
| Temperature & timer | Digital temperature and timer controls | Digital controls with temperature calibration and self-tuning |
|---|
| Pressing pressure | Adjustable pneumatic pressure and platen adjustment | Adjustable pneumatic pressure, plus balancing on the heat plate and bottom platen |
|---|
| Press & lift speed | Not specified in supplied V2 specifications | Adjustable via solenoid valve restriction adjustment |
|---|
| Operating controls | Automatic press-and-release cycle | Manual and semi-automatic modes; two-hand activation in manual mode |
|---|
| Temperature display | Unit selection not specified | Selectable Celsius or Fahrenheit |
|---|
| Best fit | Straightforward dual-station production | Production requiring additional setup and operator controls |
|---|
Comparison reflects the supplied model specifications. Features not specified for V2 should be confirmed for the exact machine configuration.
The V3 difference is control.
Both models give you dual-station pneumatic production. V3 adds more ways to fine-tune how your machine heats, applies pressure, and moves.
Technical specifications
| Specification | Details |
|---|
| Model | DTF-PRO-DBLDBL-V3 |
|---|
| Configuration | Pneumatic dual-station; manual and semi-automatic modes |
|---|
| Heat platen | 40 × 50 cm (approximately 15.75 × 19.69 in; nominal 16 × 20 in class) |
|---|
| Voltage / power | 110V: 1800W | 220V: 2700W |
|---|
| Maximum temperature | 260°C (500°F) |
|---|
| Timer range | 0–999 seconds |
|---|
| Machine dimensions | 1080 × 730 × 590 mm (approximately 42.5 × 28.7 × 23.2 in) |
|---|
| Shipping dimensions | 1230 × 770 × 650 mm (approximately 48.4 × 30.3 × 25.6 in) |
|---|
| Shipping weight | 145 kg (approximately 320 lb) |
|---|
| Maximum press thickness | 40 mm (approximately 1.57 in) |
|---|
Air supply & installation
| Specification | Details |
|---|
| Air compressor | Required; sold separately |
|---|
| Operating air pressure | 4–6 bar / 0.4–0.6 MPa (approximately 58–87 PSI) |
|---|
| Maximum air pressure | 8 bar / 0.8 MPa (approximately 116 PSI) |
|---|
| Minimum recommended compressor | 800W (approximately 1 HP) |
|---|
| Minimum recommended tank | 30 L (approximately 8 US gallons) |
|---|
Plan your setup before production.An external air compressor is required for operation and is not included. Professional setup and testing are recommended. Machine color or external appearance may vary by production batch.
Warranty, product use & safety
Warranty & Product Use
Manufacturer warranty covers defects in materials and workmanship under normal intended use. Warranty does not cover physical damage, misuse, improper installation, neglect, accidents, improper transport, or unauthorized modifications or repairs. Removal or alteration of the product serial number may void warranty coverage.
Proper installation, operation, and maintenance in accordance with all provided instructions is the responsibility of the operator. DTGPRO is not liable for incidental, consequential, or indirect damages, including loss of use, production downtime, or lost profits resulting from product use or misuse.
Safety Guidelines
- Use only with properly grounded electrical outlets.
- Operate in dry environments only.
- Keep hands clear of moving components and heated surfaces.
- Disconnect power when not in use or during maintenance.
- Keep out of reach of children.
- Read all operating instructions before use.
Free Shipping on Qualifying Orders see details |
