Flushing Solution for DTG Printers

Size		Price
1 Liter		$18.99
1 Gallon		$69.99

This is a bottle of Flushing solution for Epson printers that are using a pigment or dye based ink ONLY, you cannot use this solution for other inks.

Our flushing solution cleans your printer and lubricates it as well. Most flushing solutions dry out your printer but our solution contains a special silicone that will help lubricate the parts after cleaning.

Flushing solution should be used at the FIRST sign of a clog not months later. You should also run flushing solution through your system every 4-6 months of printing or putting it in your printer if going on vacation.

If you need refillable cartridges contact us or buy from our store.

You can try to get your printer unclogged if its been sitting for a while and we have had some customers have some success but it is better do right away.

Using this solution doesn't guarantee that your printer will get unclogged and you should do the proper maintenance on your machine to prevent a clogging. If you are SWITCHING ink types you should definitely use our solution to flush out your old inks and then swap in the new ones. If you are thinking of switching to a new ink then you may want to try ours as we have over 30 years in experience making ink.

WARNING: WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user. Specialty inks and film require a good humidity and temperature environment (55% - 75% humidity, and 75° to 80°F) to minimize risk of ink clogs and film buckling.