MEMORIAL DAY SALE: Up to 30% OFF Supplies | Up to $1000 OFF Equipment
Hurry!
Sale Ends Soon Details

iColor Select 2 Step Transfer Adhesive Media Kit for Light Dark Textiles -XL- 8.27 in x 17 in (210 x 432mm) - includes 100 sets

Price:

$249.00

iColor Select 2 Step Transfer & Adhesive Media Kit for Light & Dark Textiles -XL- 8.27 in x 17 in (210 x 432mm). iColor Select 2 Step Transfer & Adhesive Media Kit for Light & Dark Textiles -XL- 8.27 in x 17 in (210 x 432mm)

The iColor 2-Step Select Transfer Media set will allow you to transfer prints from the iColor series of printers (including white and fluorescent color prints) onto a variety of garments, especially dark fabrics. The translucent adhesive applied as a result of the 2-step process increases the adhesion to your garment for increased durability, opacity and vibrancy on your finished product. Rasterization and breathability integrated into your design, as well as using the garment color as a mask, will enhance the stretch limit and softness of your finished product. This media has several advantages which complements UniNet?s robust line of transfer media. It has a matte texture instead of a shiny finish, and has a very strong adhesive which helps prevent images from pulling apart. This lower cost media is a great everyday choice for textile transfers. Finished garments will last between 30 - 50 washes depending on how it?s laundered. It is recommended to wash finished garments inside out in cold or warm water and low agitation.

Sold in packs of 100.


WARNING: WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user. Specialty inks and film require a good humidity and temperature environment (50% - 70% humidity, and 75° to 80°F) to minimize risk of ink clogs and film buckling.