Splash Absorbing Strips (absorb potential liquid spills during flushing or changing of dampers, to minimize risk of electrical damage due to accidental spills)

Price:

$10.00

Pack

Water based inks (including DTG, DTF, UV and other inks) all conduct electricity, therefore sealing the printhead is recommended to avoid electrical damage from accidental liquid / ink spills.

This item includes SPLASH ABSORBING STRIPS to minimize electrical damage that can be caused as a result of an accidental ink or cleaning solution spill. Works on all Epson printheads. Each Splash Absorbing Strip will absorb/hold up to 6cc of ink spills.

How to use:

Simply place a Splash Absorbing Strip in the printhead before you flush or change dampers. You can also hold a Splash Absorbing Strip close to your syringe when you flush. It is recommended to use 2 Splash Absorbing Strips at a time for best prevention. See photos below.

WARNING: WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user. Specialty inks and film require a good humidity and temperature environment (50% - 70% humidity, and 75° to 80°F) to minimize risk of ink clogs and film buckling.