DTFLine VANTAGE 14 inch DX7 DTF Printer (POWERED BY KODAK Bundle)

$5,699.99

$3,950.00

Documents

DETAILS | RELATED ITEMS | FAQ

DTFLINE VANTAGE™ DX7 14-Inch DTF Printer Starter Bundle – Powered by KODAK

Professional DTFLINE printing powered by KODAK DTF inks, film and powder

This starter bundle combines the DTFLINE VANTAGE™ DX7 printer with the essential DTF consumables manufactured by KODAK. Begin with KODAK DTF inks, KODAK DTF powder and a 100-meter roll of KODAK DTF film already included. Simply add your preferred powder-curing solution, heat press and compatible Windows PC.

Width specification This printer accepts DTF film rolls up to 14 inches wide. The maximum printable image width is 13.7 inches.

13.7 inches printable widthUse film rolls up to 14 inches wide.

Epson DX7The printhead configuration that defines this model.

Up to approximately 18 sq ft per hourActual output varies by artwork and settings.

KODAK consumables includedKODAK inks, powder and a 100-meter KODAK film roll simplify your initial purchase and help you get started sooner.

The KODAK Consumables Advantage

The printer itself is a DTFLINE VANTAGE™ system. The POWERED BY KODAK designation refers to the genuine KODAK-manufactured consumables supplied with this bundle:

KODAK DTF InksA complete CMYK + White starter ink set for producing vivid full-color transfers with an opaque white underbase.

KODAK DTF FilmA 14-inch-wide, 100-meter transfer-film roll for the VANTAGE roll-fed production workflow.

KODAK DTF PowderA 1.75 lb starter supply of adhesive powder for bonding the printed transfer to compatible garments.

One Coordinated Starter PackageStart with the printer, software, training and core KODAK consumables purchased together in one convenient bundle.

Choose your VANTAGE package

Compare the available configurations and select the KODAK-powered package that best matches the equipment and supplies you already own.

VANTAGE Printer	VANTAGE Printer Plus Supplies	VANTAGE Printer & Heat Station Plus Supplies	VANTAGE Printer Plus Supplies Powered by Kodak

14" print size Roll Printing (up to 100m long) Built-in film cutter Advanced Continuous Ink System RIP Software ($450 value) Maintenance Kit & Hygrometer Personalized Training & Support	14" print size Roll Printing (up to 100m long) Built-in film cutter Advanced Continuous Ink System RIP Software ($450 value) Maintenance Kit & Hygrometer Personalized Training & Support 100 meter DTF Film Roll \| 1.75lb DTF Powder \| DTF MagicSeal 1 Liters DTF Ink	14" print size Roll Printing (up to 100m long) Built-in film cutter Advanced Continuous Ink System RIP Software ($450 value) Maintenance Kit & Hygrometer Personalized Training & Support 100 meter DTF Film Roll \| 3.5lb DTF Powder \| DTF MagicSeal 6 Liters DTF Ink DTFLine Heat Station V3 with Purifier
$3,499.99 view item	$3,798.99 view item	$3,999.99 view item	$3,950.00

Why choose DTFLINE VANTAGE™ (DX7)?

A compact, purpose-built DTF production system for professionals and growing apparel businesses that want a stronger balance of print quality, dependable daily output, and manufacturer-direct value.

The VANTAGE is built around an Epson DX7 printhead rather than a converted consumer photo printer. Its roll-fed workflow and integrated production features help reduce manual handling while supporting detailed, consistent output for frequent business use.

This package pairs the printer with KODAK-manufactured DTF inks, film and powder, giving you a recognizable, professionally manufactured consumables package from the start.

Included in this KODAK-powered package

DTFLINE VANTAGE™ DX7 printer with built-in roll feeder and cutter
KODAK DTF ink set – 1 liter total: 360 ml White and 180 ml each of Cyan, Magenta, Yellow and Black
KODAK DTF powder – 1.75 lb
KODAK DTF film – 14-inch × 100-meter roll
Driver and RIP software
Personalized virtual onboarding and training

Production-focused features

Film and printable width: Accepts DTF film rolls up to 14 inches wide; maximum printable width is 13.7 inches.

Industrial Epson DX7 printhead: Configured for the output level and operating profile of this VANTAGE model.

Up to 1440 dpi: Supports fine detail, smooth gradients, and vibrant transfer output when properly profiled and maintained.

Production output: Up to approximately 18 sq ft per hour, or up to approximately 50 shirts per hour, depending on artwork size, print mode, nesting, and the rest of the workflow.

Broad application range: Create transfers for compatible cotton, polyester, blends, denim, leather, and other materials.

Built-in roll feeder and cutter: Supports continuous film handling and clean sheet separation with less manual handling and film waste.

Built-in heater: Helps control the printed film before powdering, reduce excess powder, and improve the finished transfer feel.

Dual white-ink management: Combines white-ink stirring and continuous circulation to help keep pigment mixed and moving. Routine maintenance remains essential.

Vacuum platen: Helps hold film flat and stable for smoother feeding and a lower risk of head strikes.

Automatic cleaning and continuous ink supply: Supports more consistent day-to-day operation and longer production runs.

Hygrometer sensor: Makes it easier to monitor the print-room humidity that affects white-ink performance.

110V power: The printer connects to standard power without a special printer circuit. Verify the requirements of any separate curing equipment.

RIP software, onboarding, and training: Core software and personalized virtual guidance are included to help shorten the learning curve.

Designed to make daily DTF production easier

1. Print with KODAK DTF inks
Use the roll-fed system, vacuum platen, continuous ink tanks and RIP software to prepare and print nested transfer jobs using the included KODAK CMYK + White inks.

2. Manage white ink
Stirring and circulation help support consistent white-ink delivery when paired with the required daily maintenance and proper humidity.

3. Powder and cure
Apply the included KODAK DTF powder to the printed KODAK film, then cure it with appropriate equipment. Curing equipment is sold separately with this package.

4. Press and sell
Use a compatible heat press to apply finished transfers to suitable garments and products.

A strong fit for

Established apparel businesses adding or expanding DTF
Shops that value DX7 print quality and dependable daily production
Businesses seeking professional output without stepping into a large industrial footprint

Before your system arrives

Powder application and curing equipment
Windows PC with a built-in Ethernet port
Heat press for applying finished transfers
Humidifier for maintaining the recommended 55–75% RH environment

Printer specifications

Film compatibility	Accepts rolls up to 14 inches (35.5 cm) wide; roll feeder included
Maximum printable width	13.7 inches
Printhead configuration	Industrial Epson DX7 printhead
Estimated output	Up to approximately 18 sq ft per hour; up to approximately 50 shirts per hour depending on artwork size, print settings, nesting, and workflow
Printer power	110V standard power
Printer dimensions	31 × 19 × 13 in uncrated; 35 × 22 × 16 in crated
Printer weight	70 lb uncrated; 98 lb crated
Computer requirement	Windows 7 or later PC with a built-in Ethernet port for RIP connectivity
Recommended environment	Maintain approximately 55–75% relative humidity; a humidifier may be required

Production figures are estimates, not guarantees. Actual output depends on artwork dimensions, print mode, pass count, RIP settings, nesting, operator workflow, curing capacity, and garment handling.

Warranty, availability, and support

6-month warranty: Includes replacement of defective materials, excluding consumables such as printheads and inks. Review the warranty and terms page for complete coverage, exclusions, and procedures.

Availability: Typical lead time is 2–4 weeks unless marked QUICKSHIP; QUICKSHIP units generally ship in approximately one week. Contact DTGPRO to confirm current availability.

Personalized onboarding: Virtual setup guidance and training are included to help your team prepare the system and establish the required operating and maintenance routines.

Start producing with DTFLINE equipment and KODAK consumables

Choose the DTFLINE VANTAGE™ DX7 Starter Bundle powered by KODAK DTF inks, film and powder. Need help deciding? Contact DTGPRO for a personalized recommendation based on your order volume, workspace and production goals.

RELATED / RECOMMENDED ITEMS:

WARNING: WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user. Specialty inks and film require a good humidity and temperature environment (55% - 75% humidity, and 75° to 80°F) to minimize risk of ink clogs and film buckling.