DTFLine VANTAGE CORE 14 inch XP600 DTF Printer (POWERED BY KODAK Bundle)

$4,449.99

$2,950.00

Documents

DETAILS | RELATED ITEMS | FAQ

DTFLINE VANTAGE CORE™ 14? XP600 DTF Printer Bundle

A complete starter package featuring KODAK-manufactured DTF ink, film, and adhesive powder

Start producing professional DTF transfers with the essential printer, software, training, and consumables already included. Every production consumable supplied with this bundle-including the DTF inks, transfer film, and adhesive powder-is manufactured by KODAK for a coordinated, dependable starting workflow.

The POWERED BY KODAK difference This package pairs the DTFLINE VANTAGE CORE printer platform with a complete set of KODAK-manufactured DTF consumables. The included inks, film, and powder come from one globally recognized imaging brand, helping eliminate the guesswork of sourcing your initial consumables separately.

Width specification This printer accepts DTF film rolls up to 14 inches wide. The maximum printable image width is 13.2 inches on all VANTAGE CORE configurations.

13.2? Printable Width Accepts DTF film rolls up to 14 inches wide.

Single XP600 Printhead An accessible balance of image quality, output, and operating cost.

Approximately 12-16 Sq Ft/Hour Actual production varies by artwork, settings, and workflow.

KODAK Consumables Included KODAK-manufactured DTF ink, adhesive powder, and a 100-meter film roll.

Choose your VANTAGE package

Compare the available configurations and select the package that best matches the equipment and supplies you already own.

VANTAGE CORE Printer	VANTAGE CORE Printer Plus Supplies	VANTAGE CORE Printer & Heat Station Plus Supplies	VANTAGE CORE Printer Plus Supplies Powered by Kodak

14" print size Roll Printing (up to 100m long) Built-in film cutter Advanced Continuous Ink System RIP Software ($450 value) Maintenance Kit & Hygrometer Personalized Training & Support	14" print size Roll Printing (up to 100m long) Built-in film cutter Advanced Continuous Ink System RIP Software ($450 value) Maintenance Kit & Hygrometer Personalized Training & Support 100 meter DTF Film Roll \| 1.75lb DTF Powder \| DTF MagicSeal 1 Liters DTF Ink	14" print size Roll Printing (up to 100m long) Built-in film cutter Advanced Continuous Ink System RIP Software ($450 value) Maintenance Kit & Hygrometer Personalized Training & Support 100 meter DTF Film Roll \| 3.5lb DTF Powder \| DTF MagicSeal 6 Liters DTF Ink DTFLine Heat Station V3 with Purifier
$2,500.00 view item	$2,750.00 view item	$2,950.00 view item	$2,950.00

Why choose VANTAGE CORE™ POWERED BY KODAK?

This bundle brings together the DTFLINE VANTAGE CORE roll-fed printer platform and genuine KODAK-manufactured DTF consumables in one coordinated package.

Instead of beginning with separately sourced or unfamiliar consumables, you receive KODAK DTF inks, KODAK DTF film, and KODAK DTF adhesive powder with your system.

The VANTAGE CORE moves beyond modified desktop-printer workflows with an integrated roll feeder, cutter, heater, vacuum platen, white-ink management, and continuous ink delivery. Its proven XP600 platform offers an excellent entry point for startups, apparel decorators, and growing print businesses.

Included in this bundle

DTFLINE VANTAGE CORE 14? printer with built-in roll feeder and cutter
KODAK DTF ink set totaling 1 liter: 360 ml White and 180 ml each of Cyan, Magenta, Yellow, and Black
1.75 lb of KODAK DTF adhesive powder
100-meter roll of KODAK DTF transfer film
Driver and RIP software
Personalized virtual onboarding and training

One bundle. One coordinated consumable system.

Ink, film, and adhesive powder work together at every stage of DTF production. This bundle starts you with all three consumable components manufactured by KODAK:

KODAK DTF Inks
A complete CMYK and White ink set for full-color DTF printing.

KODAK DTF Film
A full 100-meter transfer-film roll sized for the VANTAGE CORE workflow.

KODAK DTF Adhesive Powder
The heat-activated adhesive component used to bond the printed design to compatible garments.

Ready to Start Producing
Add an appropriate powder-curing solution, heat press, and compatible Windows PC to complete your workflow.

Production-focused printer features

Film and printable width: Accepts DTF film rolls up to 14 inches wide with a maximum printable width of 13.2 inches.

Single Epson XP600 printhead: Configured for the output level and operating profile of this VANTAGE model.

Up to 1440 dpi: Supports fine details, smooth gradients, and vibrant transfer output when properly profiled and maintained.

Production output: Approximately 12-16 sq ft per hour, or approximately 30-40 shirts per hour, depending on artwork size, print mode, nesting, and workflow.

Broad application range: Create transfers for compatible cotton, polyester, blends, denim, leather, and other materials.

Built-in roll feeder and cutter: Supports continuous film handling and clean sheet separation with less manual handling and film waste.

Built-in heater: Helps control the printed film before powdering, reduce excess powder, and improve the finished transfer feel.

Dual white-ink management: Combines white-ink stirring and continuous circulation to help keep pigment mixed and moving. Routine maintenance remains essential.

Vacuum platen: Helps hold the film flat and stable for smoother feeding and a lower risk of head strikes.

Automatic cleaning and continuous ink supply: Supports more consistent day-to-day operation and longer production runs.

Hygrometer sensor: Makes it easier to monitor the print-room humidity that affects white-ink performance.

110V printer power: The printer connects to standard power without requiring a special printer circuit. Verify the requirements of any separate curing equipment.

RIP software, onboarding, and training: Core software and personalized virtual guidance are included to help shorten the learning curve.

A straightforward DTF production workflow

1. Print with KODAK DTF inks
Use the roll-fed system, vacuum platen, continuous ink tanks, and RIP software to prepare and print nested transfer jobs.

2. Manage the white ink
Built-in stirring and circulation help support consistent white-ink delivery when paired with required daily maintenance and proper humidity.

3. Apply KODAK powder and cure
Apply the included KODAK adhesive powder and cure the printed film using appropriate equipment. Curing equipment is sold separately.

4. Press and sell
Use a compatible heat press to apply the finished transfers to suitable garments and products.

A strong fit for

New businesses entering DTF printing
Etsy sellers, apparel decorators, and in-house merchandise teams
Low-to-medium-volume shops ready to move beyond modified desktop printers
Buyers who prefer to begin with KODAK-manufactured consumables instead of sourcing ink, film, and powder separately

Additional equipment required

Powder application and curing equipment
Windows PC with a built-in Ethernet port
Heat press for applying finished transfers
Humidifier for maintaining the recommended 55-75% RH environment

Printer specifications

Film compatibility	Accepts rolls up to 14 inches (35.5 cm) wide; roll feeder included
Maximum printable width	13.2 inches
Printhead configuration	Single Epson XP600 printhead
Estimated output	Approximately 12-16 sq ft per hour; approximately 30-40 shirts per hour depending on artwork size, print settings, nesting, and workflow
Included consumable brand	KODAK-manufactured DTF inks, DTF film, and DTF adhesive powder
Printer power	110V standard power
Printer dimensions	31 x 19 x 13 in uncrated; 35 x 22 x 16 in crated
Printer weight	Approximately 70-75 lb uncrated; 95-100 lb crated
Computer requirement	Windows 7 or later PC with a built-in Ethernet port for RIP connectivity
Recommended environment	Maintain approximately 55-75% relative humidity; a humidifier may be required

Production figures are estimates, not guarantees. Actual output depends on artwork dimensions, print mode, pass count, RIP settings, nesting, operator workflow, curing capacity, and garment handling.

Warranty, availability, and support

6-month warranty: Includes replacement of defective materials, excluding consumable components such as printheads and inks. Review the warranty and terms page for complete coverage, exclusions, and procedures.

Availability: Available for ordering from current inventory, subject to stock availability.

Personalized onboarding: Virtual setup guidance and training are included to help your team prepare the system and establish the required operating and maintenance routines.

Start your DTF operation with a better bundle

Get the DTFLINE VANTAGE CORE printer, software, personalized onboarding, and KODAK-manufactured ink, film, and adhesive powder in one complete starter package.

KODAK is a trademark of Eastman Kodak Company. The DTFLINE VANTAGE CORE printer is manufactured and sold by DTGPRO and is not manufactured by Eastman Kodak Company. References to "Powered by KODAK" describe the KODAK-manufactured consumables included with this bundle.

RELATED / RECOMMENDED ITEMS:

WARNING: WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user. Specialty inks and film require a good humidity and temperature environment (55% - 75% humidity, and 75° to 80°F) to minimize risk of ink clogs and film buckling.