Automated 30" DTF Production Package
Roland TY-300i DTF Printer + MIRO-36 Shaker/Dryer + Supplies Bundle
High-speed printing meets compact, automated finishing.
Now with Double White Ink 36" MIRO Shaker Included Runs on 110V Power Roland Supplies Included
Create a complete roll-to-roll DTF workflow with the Roland TY-300i and MIRO-36 Production Bundle. This package combines Roland's high-speed 30-inch commercial DTF printer with the modular MIRO-36 automatic powder shaker and curing system, plus genuine Roland inks, film and adhesive powder.
Available Bundle Options:
| Roland TY-300i Printer & Cutter Bundle | Roland TY-300i Printer & Cutter Bundle
Plus Supplies | Roland TY-300i Printer & CutterBundle
Plus Shaker with Fume Extractor & Supplies | Roland TY-300i Printer & CutterBundle
Plus MIRO36 Shaker |
|---|
 |  |  |  |
- TY-300i DTF Printer & Cutter
- Maintenance Kit & Accessories
- FlexiDESIGNER VersaSTUDIO Software ($2000 Value)
- VersaWorks RIP Software ($795 value)
- Roland DG Connect
- 1 Year Warranty
| - TY-300i DTF Printer & Cutter
- Roland DTF Ink (1 each 500ml cartridge CMYK and 2 each white) + Cleaning Cartridge
- Roland DTF Powder (5kg) and Roland DTF Film (30 in x 328 ft)
- Maintenance Kit & Accessories
- FlexiDESIGNER VersaSTUDIO Software ($2000 Value)
- VersaWorks RIP Software ($795 value)
- Roland DG Connect
- 1 Year Warranty
| - TY-300i DTF Printer & Cutter
- Roland DTF Ink (1 each 500ml cartridge CMYK and 2 each white) + Cleaning Cartridge
- Roland DTF Powder (5kg) and Roland DTF Film (30 in x 328 ft)
- Roland RDTFS800 30? Inline DTF Powder Shaker & Curing Oven with Integrated Fume Extractor ($7500 value)
- Maintenance Kit & Accessories
- FlexiDESIGNER VersaSTUDIO Software ($2000 Value)
- VersaWorks RIP Software ($795 value)
- Roland DG Connect
- 1 Year Warranty
| - TY-300i DTF Printer & Cutter
- Roland DTF Ink (1 each 500ml cartridge CMYK and 2 each white) + Cleaning Cartridge
- Roland DTF Powder (5kg) and Roland DTF Film (30 in x 328 ft)
- MIRO36 Shaker
- Maintenance Kit & Accessories
- FlexiDESIGNER VersaSTUDIO Software ($2000 Value)
- VersaWorks RIP Software ($795 value)
- Roland DG Connect
|
| $16,995.00 view item | $17,795.00 view item | $23,190.00 view item | $23,495.00 |
188.18 Sq. Ft./Hr. High-Speed Output
36" MIRO Maximum Film Width
110V Energy-Efficient Operation
Automated Powdering, Recovery & Curing
A Complete Print-to-Cure DTF Workflow
This production package is designed for apparel decorators, wholesale transfer producers and growing print shops that want the consistency and efficiency of automated finishing without requiring an oversized, high-voltage industrial installation.
Printed film feeds directly from the TY-300i into the MIRO-36, where adhesive powder is applied, excess powder is recovered and the transfer is cured automatically. The finished film exits ready for heat-press application.
1 Print
Produce vivid CMYK graphics with a strong and consistent white underbase.
2 Powder
Automatically apply adhesive powder and recover excess material for reuse.
3 Cure
Melt and cure the adhesive evenly using adjustable temperature and conveyor controls.
Complete Bundle Includes Printer, MIRO-36 Finishing System and Genuine Roland Supplies
Roland TY-300i DTF Printer
- 30" commercial direct-to-film printer
- CMYK + expanded White ink configuration
- High-speed output up to 188.18 sq. ft./hr.
- Maximum 1,200 dpi print resolution
- Dedicated printer stand
- Media holders and printer accessories
- VersaWorks 7 RIP software
- Roland DG Connect production management
MIRO-36 Shaker & Dryer
- Automatic adhesive powder application
- Automatic excess-powder recovery
- Integrated heating and curing tunnel
- Adjustable conveyor speed and temperature
- Precision film transport system
- Built-in air purification
- Touchscreen control interface
- Film support up to 36 inches wide
Genuine Roland DTF Supplies
- One Cyan S-PG2 ink cartridge
- One Magenta S-PG2 ink cartridge
- One Yellow S-PG2 ink cartridge
- One Black S-PG2 ink cartridge
- Two White S-PG2 ink cartridges
- Roland cleaning cartridge
- 5 kg of Roland DTF adhesive powder
- 30" x 328' Roland cold-peel DTF film
Printer Accessories
- 45-degree cutting blade and holder
- Cross-cutter replacement blades
- Cleaning solution and swabs
- Drain bottle and tweezers
- Power cord
- User documentation
- One-year Roland manufacturer warranty*
Now with Double White Ink
The TY-300i features expanded white-ink capacity for longer, white-heavy production runs with fewer interruptions. Improved circulation and intelligent ink switching help maintain stable white density while reducing operator intervention.
- Expanded white-ink capacity for longer production runs
- Strong, balanced white underbase coverage
- Improved white-ink circulation
- Intelligent Ink Switching for continuous compatible production
- Automated cleaning and guided maintenance
Powerful Performance. Maximum Productivity.
The TY-300i delivers output up to 117.32 sq. ft./hr. in standard mode and up to 188.18 sq. ft./hr. in high-speed mode. The MIRO-36 receives printed film directly from the printer and automates the remaining powdering and curing process.
- Professional production speeds for demanding order volumes
- Maximum printable width of 28.9 inches
- Supports media up to 30 inches wide
- Continuous printing, powdering and curing
- Reduced manual labor and transfer handling
- Ideal for gang sheets and wholesale transfer production
MIRO-36 Industrial Automated DTF Finishing System
High-capacity automated powdering and curing in a modular, energy-efficient platform.
The MIRO-36 is engineered for continuous production while remaining practical for growing print shops. Its 36-inch film capacity comfortably accommodates output from the 30-inch TY-300i, while its modular construction is designed to simplify delivery and installation through standard shop doors.
36" Maximum Film Width
2 kg Approximate Powder Capacity
110V / 20A Power Requirement
Automatic Powder Application
Evenly distributes adhesive powder across the printed surface for consistent transfer coverage.
Powder Recovery System
Collects and recycles excess adhesive powder to reduce material waste and operating costs.
Integrated Curing Tunnel
Melts and cures adhesive powder to create durable, production-ready transfers.
Adjustable Production Controls
Fine-tune conveyor speed, powder vibration and curing temperature for different materials.
Precision Film Transport
Maintains stable film movement to reduce skew and promote even powdering and curing.
Built-In Air Purification
Integrated filtration helps reduce fumes and airborne particles created during production.
Touchscreen Interface
Provides intuitive access to temperature, conveyor and powdering controls.
Modular Construction
Industrial construction designed to support continuous use while fitting through standard shop doors.
Energy-Efficient Operation
Runs on 110V power with approximately 2.25 kW consumption.
Large-Format Compatibility
Supports film widths up to 36 inches for compatibility with 30-inch DTF production printers.
MIRO-36 Specifications
| Specification | MIRO-36 |
| Maximum Film Width | 36 inches |
| Powder Hopper Capacity | Approximately 2 kg (4.4 lb.) |
| Power Requirement | 110V / 2.25 kW / 20A |
| Approximate Dimensions | 76.2" W x 50.4" D x 35" H |
| Approximate Weight | 595 lb. |
| Control Interface | Touchscreen |
| Air Purification | Integrated filtration system |
Vibrant Color and Remarkable Detail
With maximum print resolution up to 1,200 dpi, the TY-300i accurately reproduces small lettering, fine lines, photographic images, smooth gradients and complex graphics.
- Vibrant CMYK color with brilliant white underbases
- Smooth gradients and natural photographic reproduction
- Strong and consistent solid-color coverage
- Sharp small-text and fine-line reproduction
- Roland profiles designed for consistent color output
Durable, Professional-Quality Transfers
Roland S-PG2 inks, Roland DTF film and Roland adhesive powder are designed to work together as a coordinated transfer system. The result is flexible, vibrant and wash-resistant graphics suitable for professional apparel and merchandise.
In Roland internal testing, TY-300i transfers remained bright and crack-free after 50 wash cycles.
Actual durability may vary according to the garment, application settings, heat press, transfer method and washing conditions.
Certified Ink and Powder Safety
Roland DG's S-PG2 inks and recommended DTF powder are OEKO-TEX® ECO PASSPORT certified and compliant with EU REACH regulations.
- OEKO-TEX® ECO PASSPORT certified ink and powder
- REACH-compliant formulations
- Developed specifically for Roland DTF production
- Professional transfer quality and consistency
VersaWorks 7 RIP Software Included
The TY-300i includes Roland VersaWorks 7 for professional artwork preparation, color management and job control.
- Automatic image inversion for the DTF process
- PNG support with simplified background removal
- Five print queues and five hot folders
- Advanced cropping, scaling, tiling and nesting
- Professional color-management controls
- Production-ready Roland print presets
Simplified Maintenance and Production Monitoring
Automated cleaning, improved white-ink circulation and guided maintenance help keep the TY-300i ready for daily production. Roland DG Connect adds visibility into printer status, ink usage and maintenance requirements.
- Automated printhead cleaning based on usage
- Improved white-ink circulation
- Guided operator maintenance procedures
- Printer status and production monitoring
- Ink usage and maintenance notifications
Professional DTF Applications
Custom Apparel
T-shirts, hoodies, sweatshirts, fashion garments and uniforms.
Sports & Workwear
Jerseys, team apparel, performance garments and work uniforms.
Accessories
Tote bags, aprons, fabric accessories and promotional products.
Wholesale Transfers
Gang sheets and ready-to-press transfers for decorators and resellers.
Award-Winning Performance 2026 Keypoint Intelligence BLI Pick Award
The Roland TY-300i received the 2026 Keypoint Intelligence BLI Pick Award for Outstanding Direct-to-Film Printer following independent evaluation of its image quality, color accuracy, durability, productivity and usability.
Roland TY-300i Specifications
| Specification | Roland TY-300i |
| Printing Technology | Piezo inkjet |
| Ink Configuration | Cyan, Magenta, Yellow, Black and White |
| Ink Type | Roland S-PG2 DTF Ink, 500 ml cartridges |
| Media Width | 7.2" to 30" (182 to 762 mm) |
| Maximum Printing Width | 28.9" (736 mm) |
| Maximum Resolution | 1,200 dpi |
| Standard Production Speed | Up to 117.32 sq. ft./hr. |
| High-Speed Production | Up to 188.18 sq. ft./hr. |
| Maximum Roll Weight | 66.1 lb. (30 kg) |
| Connectivity | Ethernet |
| Included RIP Software | Roland VersaWorks 7 |
| Printer Dimensions | 80" W x 29.5" D x 55.8" H |
| Printer Weight | 300 lb. (136 kg) |
Required or Recommended Separately
The printer, MIRO-36 shaker/dryer, initial inks, DTF film and adhesive powder are included. The following items or services are required or recommended separately:
- Heat press for applying finished transfers
- Compatible production computer
- Dedicated 110V / 20A electrical circuit for the MIRO-36, subject to applicable electrical codes
- On-Site Installation & Training with a Roland-certified technician
Automated Production Without the High-Voltage Footprint
Combine Roland's award-winning DTF print performance with the MIRO-36's automated powdering, curing, filtration and energy-efficient 110V operation. Print faster. Handle less. Produce more.
Free Shipping on Qualifying Orders see details |
